Inheritance diagram for KerbalSeat:

Public Member Functions

void BoardSeat ()

bool CanBeDetached ()

Returns true if chair is empty. More...

bool CanBeOffset ()

Returns true if chair is empty. More...

bool CanBeRotated ()

Returns true if chair is empty. More...

bool EditorSeatBoundsAreClear ()

Runs a SphereSweepTest to see if there is enough room around the seat to fit a Kerbal. This function is set up to be run in the VAB/SPH. More...

virtual VesselControlState GetControlSourceState ()

virtual bool IsCommCapable ()

void LeaveSeat (KSPActionParam act)

KSP Action that makes the occupant of the kerbal seat to eject from seat. When multiple will leave at once all the vessels will switch focus to active vessel for every kerbal seat ejection. More...

void MakeReferenceToggle (KSPActionParam act)

void MakeReferenceTransform ()

void OnChildRemove (Part child)

override void OnInventoryModeEnable ()

This method will be called when this modules part and itself is first enabled (when it is attached to a vessel) when created in Inventory/Construction mode. More...

override void OnLoad (ConfigNode node)

Use OnLoad to load any additional data from the ConfigNode provided More...

override void OnSave (ConfigNode node)

Use OnSave to serialize additional module information into the ConfigNode provided More...

override void OnStart (PartModule.StartState state)

override void OnStartFinished (StartState state)

Called when the part finishes starting. The StartState gives an indication of where in flight you are. All values may not be plugged in! More...

bool SeatBoundsAreClear (Part candidate)

Runs a CheckCapsule to see if there is enough room around the seat to fit a Kerbal. More...

virtual void UpdateNetwork ()

Public Member Functions inherited from PartModule

void AddPartModuleAdjuster (AdjusterPartModuleBase newAdjuster)

Call this to add an adjuster to this part module. More...

void AddPartModuleAdjusterList (List< AdjusterPartModuleBase > moduleAdjusters)

Applies the appropriate module adjusters. Performs checks to make sure that the adjusters are valid too. More...

bool AppliedUpgrades ()

Returns true if upgrades are applied More...

void ApplyAdjustersOnStart ()

Called when a part module is loaded and applies all of the currently loaded adjusters. More...

virtual void ApplyUpgradeNode (List< string > appliedUps, ConfigNode node, bool doLoad)

Applies the upgrades to a confignode. Will either copy the upgrades back to the node or (if doLoad) calls load/onload on it. More...

virtual bool ApplyUpgrades (StartState state)

Will find and apply upgrades. Called during Part's ModulesOnStart, before a module's OnStart. More...

void Awake ()

delegate bool boolPMApplyUpgrades (PartModule pm, StartState state)

delegate bool boolPMBoolDelegate (PartModule pm, bool apply)

void ClearPersistentId ()

Clear the modules persistentId More...

void Copy (PartModule fromModule)

virtual void DemoteToPhysicslessPart ()

This method will be called from Part class DemoteToPhysicslessPart when the part is being converted from physical to physicsless part. It is called before the joints and rigidbodies are destroyed. More...

virtual bool FindUpgrades (bool fillApplied, ConfigNode node=null)

Find applicable upgrades to the partmodule (isunlocked and isenabled) and add to the upgradesApplied list. Pass true if you want to add the upgrades to upgradesApplied, false if you just want to know if at least one upgrade is applicable (unlocked rather than enabled) More...

virtual Color GetCurrentColor ()

Returns the current part module color. More...

virtual Color GetCurrentColor (string fieldName)

Returns the current part module color for a field where usespe. More...

virtual string GetInfo ()

Returns formatted string of additional data for use in the VAB and SPH More...

virtual string GetModuleDisplayName ()

Override this to provide a Localized version of the PartModules Name for UI components More...

uint GetPersistenActiontId ()

Get the modules persistentID, and create one if it doesnt already have one More...

uint GetPersistentId ()

Get the modules persistentID, and create one if it doesnt already have one More...

virtual string GetStagingDisableText ()

virtual string GetStagingEnableText ()

virtual string GetUpgradeInfo ()

Called by Upgrade Stats dialog More...

bool HasUpgrades ()

Returns true if upgrades exist for the partmodule More...

virtual bool IsStageable ()

Should this module be counted when seeing whether to have a stack icon present? Override in a module for custom behavior; otherwise returns true if the module (or something the module inherits from above PartModule itself) overrides OnActive() More...

bool IsValidContractObjective (string objectiveType)

Returns if, for example, an antenna part module qualifies as an antenna for contracts. More...

void Load (ConfigNode node)

virtual void LoadUpgrades (ConfigNode node)

Loads module-relevant upgrades from the partmodule confignode More...

uint NewPersistentId ()

Reset the modules persistentId to a new number More...

virtual void OnActive ()

Called when the part is set active (after unpacking etc) More...

virtual void OnAwake ()

Method fires once the module has been added to the part. Use for first time setup. Module will not have loaded fully by this point More...

virtual void OnColorChanged (Color color)

Meant to be overwritten by part modules implementing color changes. In this case, it doesn't matter which color picker changed specifically. More...

virtual void OnColorChanged (Color color, string pickerID="")

Meant to be overwritten by part modules implementing color changes More...

virtual void OnConstructionModeFixedUpdate ()

This method will be called when in EVA Construction mode and this part and itself is disabled (when it is not attached to a vessel) every FixedUpdate(). More...

virtual void OnConstructionModeUpdate ()

This method will be called when in EVA Construction mode and this part and itself is disabled (when it is not attached to a vessel) every Update(). More...

virtual void OnCopy (PartModule fromModule)

Use OnCopy to copy any additional data from the PartModule provided More...

virtual void OnFixedUpdate ()

Called every physics/fixed frame that the part is active More...

virtual void OnIconCreate ()

Method fires just before components are stripped from the gameobject to make it an icon. (The part is instantiated and then various components like Part, PartModule, EffectBehaviour, Colliders, Particles, etc are stripped and then it's set as the icon prefab. This lets PartModules do stuff to the model right before that happens. More...

virtual void OnInactive ()

Called before the part goes inactive (after packing etc) More...

virtual void OnInitialize ()

Called on all modules after all parts are loaded but before they give the ship to the game More...

virtual void OnInventoryModeDisable ()

This method will be called when this modules part and itself is first disabled (when it is not attached to a vessel) when created in Inventory/Construction mode. More...

void OnModuleAdjusterAddedWrapper (AdjusterPartModuleBase adjuster)

Wrapper to check the mission expansion availability before performing processing specific to this part module when an adjuster is added. More...

virtual void OnModuleAdjusterRemoved (AdjusterPartModuleBase adjuster)

Perform processing specific to this part module when an adjuster is removed. By default this does nothing is up to each part module to implement it properly. More...

virtual void OnPartCreatedFomInventory (ModuleInventoryPart moduleInventoryPart)

This method is called when a part is being taken out from a slot while being in EVAConstruction mode. More...

virtual void OnStart (StartState state)

Called when the part starts. The StartState gives an indication of where in flight you are. All values may not be plugged in! More...

virtual void OnStartBeforePartAttachJoint (StartState state)

Called in flight scene in Part.Start just before the Part attachnode joints are created. More...

virtual void OnStoredInInventory (ModuleInventoryPart moduleInventoryPart)

Called when the part is stored in an inventory. More...

virtual void OnUpdate ()

Called every frame that the part is active More...

virtual void OnWasCopied (PartModule copyPartModule, bool asSymCounterpart)

Called when the PartModule was copied, through Alt+Copy or symmetry More...

virtual void OnWillBeCopied (bool asSymCounterpart)

Called when the PartModule is about to be copied, through Alt+Copy or symmetry More...

virtual bool OnWillBeMirrored (ref Quaternion rotation, AttachNode selPartNode, Part partParent)

This is called in the Editor scene when a symmetry copy of a part is being positioned. Only called on the symmetry parts and only when symmetry mode is set to Mirror. It allows the mirror rotation to be changed and returned before being applied to the symmetry copy part.

Parameters

rotation	The current calculated rotation. Will be updated if method returns true.
selPartNode	The attachnode.
partParent	The part that will become this part's parent.

Returns: True if the rotation was changed. Otherwise will return false.

More...

virtual List< Color > PresetColors ()

Preset colors received for any part module. By default, returns only black, override to make your own selection. More...

virtual string PrintUpgrades ()

virtual void PromoteToPhysicalPart ()

This method will be called from Part class PromoteToPhysicalPart when the part is being converted from physicsless to physical part. More...

void RemovePartModuleAdjuster (AdjusterPartModuleBase oldAdjuster)

Call this to remove an adjuster from this part module. More...

void RemovePartModuleAdjusterList (List< AdjusterPartModuleBase > moduleAdjusters)

Removes the appropriate module adjusters. Performs checks to make sure that the adjusters are valid too. More...

void Save (ConfigNode node)

virtual void SetStaging (bool newValue)

Run by the part's staging toggle handler, sets staging on modules on symmetry counterparts. More...

void SetStagingState (bool newState)

Set the staging enabled bool for this module. More...

virtual bool StagingEnabled ()

Gets current staging status (is staging enabled for this module) Override me! More...

virtual bool StagingToggleEnabledEditor ()

virtual bool StagingToggleEnabledFlight ()

void ToggleStaging ()

virtual void UpdateStagingToggle ()

Updates the staging toggle More...

delegate void voidPMApplyNodeDelegate (PartModule pm, List< string > appliedUps, ConfigNode node, bool doLoad)

delegate void voidPMDelegate (PartModule pm)

delegate void voidPMNodeDelegate (PartModule pm, ConfigNode node)

Public Attributes
string	controlTransformName = ""

Vector3	ejectDirection = Vector3.up

Vector3	ejectionForceDirection = Vector3.up
	The direction the Ejection force will be applied, local space relative to the seat More...

float	ejectionForceMax = 100f
	The max Ejection Force for a kerbal More...

float	ejectionForcePercentage = 0f
	An abstract strength value for ejection force, if not 0 then the kerbal will be Ejected along the ejectionForceDirection More...

string	seatName = ""

string	seatPivotName

Public Attributes inherited from PartModule
bool	isEnabled = true

bool	moduleIsEnabled = true

string	moduleName

bool	overrideStagingIconIfBlank = true

ModuleResourceHandler	resHandler = new ModuleResourceHandler()

bool	showUpgradesInModuleInfo = false

ProtoPartModuleSnapshot	snapshot

string	stagingDisableText = ""

bool	stagingEnabled = true

string	stagingEnableText = ""

bool	stagingToggleEnabledEditor = false

bool	stagingToggleEnabledFlight = false

List< ConfigNode >	upgrades

List< string >	upgradesApplied = new List<string>()

bool	upgradesApply = true

bool	upgradesAsk = true

Properties
Transform	ControlTransform `[get]`

float	EjectionForce `[get]`
	The Ejection Force that is applied to the kerbal on Leave Seat/Eject Kerbal Action More...

Part	Occupant `[get]`

Transform	SeatPivot `[get]`

Properties inherited from PartModule
BaseActionList	Actions `[get]`

int	ClassID `[get]`

string	ClassName `[get]`

List< AdjusterPartModuleBase >	CurrentModuleAdjusterList `[get]`
	List of all the module adjusters that are currently active on this part module. More...

BaseEventList	Events `[get]`

BaseFieldList	Fields `[get]`

string	GUIName `[get]`

bool	HasAdjusters `[get]`
	Has this part module been adjusted? More...

ReflectedAttributes	ModuleAttributes `[get, set]`

Part	part `[get, set]`

uint	PersistentActionsId `[get, set]`
	A unique identifier for each vessel including from when it was Shipconstruct More...

uint	PersistentId `[get]`
	A unique identifier for each vessel including from when it was Shipconstruct More...

Vessel	vessel `[get]`

Properties inherited from CommNet.ICommNetControlSource
string	name `[get]`

Additional Inherited Members
Public Types inherited from PartModule
enum	PartUpgradeState { PartUpgradeState.NONE, PartUpgradeState.LOCKED, PartUpgradeState.AVAILABLE }

enum	StartState { StartState.None = 0, StartState.Editor = 1, StartState.PreLaunch = 2, StartState.Landed = 4, StartState.Docked = 8, StartState.Flying = 16, StartState.Splashed = 32, StartState.SubOrbital = 64, StartState.Orbital = 128 }

Static Public Member Functions inherited from PartModule
static ReflectedAttributes	GetReflectedAttributes (Type partModuleType)

static PartUpgradeState	UpgradesAvailable (Part part)
	Returns true if at least one module on the part has at least one upgrade available (isUnlocked) More...

static PartUpgradeState	UpgradesAvailable (Part part, ConfigNode node)
	Returns true if at least one module on the part has at least one upgrade available (isUnlocked) More...

Static Public Attributes inherited from PartModule
static voidPMApplyNodeDelegate	ApplyUpgradeNodeDel

static boolPMApplyUpgrades	ApplyUpgradesDel

static bool	ApplyUpgradesEditorAuto = true

static boolPMBoolDelegate	FindUpgradesDel

static voidPMNodeDelegate	LoadExpansionNodes
	Hook for loading extra nodes common to all part modules. More...

static voidPMNodeDelegate	LoadUpgradesDel

static voidPMNodeDelegate	SaveExpansionNodes
	Hook for saving extra nodes common to all part modules. More...

static voidPMDelegate	SetupExpansion
	Hook for performing extra setup common to all part modules. More...

static string	UpgradesAvailableString = "#autoLOC_6002273"

static string	UpgradesLockedString = "#autoLOC_6002274"

Protected Member Functions inherited from PartModule
ConfigNode	GetUpgrade (string name)

virtual void	LoadUpgradesApplied (List< string > applieds, ConfigNode node)
	Load the applied upgrade names More...

virtual void	OnModuleAdjusterAdded (AdjusterPartModuleBase adjuster)
	Perform processing specific to this part module when an adjuster is added. By default this does nothing is up to each part module to implement it properly. More...

virtual void	SaveUpgradesApplied (ConfigNode node)
	Save the applied upgrades. More...

IEnumerator	UpgradeWaitForScenarioModules ()

Static Protected Attributes inherited from PartModule
static Dictionary< string, ConfigNode >	exclusives = new Dictionary<string, ConfigNode>()

static Dictionary< Type, ReflectedAttributes >	reflectedAttributeCache = new Dictionary<Type, ReflectedAttributes>()

Member Function Documentation

void KerbalSeat.BoardSeat ( )

inline

bool KerbalSeat.CanBeDetached ( )

inline

Returns true if chair is empty.

Returns

Implements IConstruction.

bool KerbalSeat.CanBeOffset ( )

inline

Returns true if chair is empty.

Returns

Implements IConstruction.

bool KerbalSeat.CanBeRotated ( )

inline

Returns true if chair is empty.

Returns

Implements IConstruction.

bool KerbalSeat.EditorSeatBoundsAreClear ( )

inline

Runs a SphereSweepTest to see if there is enough room around the seat to fit a Kerbal. This function is set up to be run in the VAB/SPH.

Returns: True if the seat is clear, false if it intersects with another part.

virtual VesselControlState KerbalSeat.GetControlSourceState ( )

inlinevirtual

Implements CommNet.ICommNetControlSource.

virtual bool KerbalSeat.IsCommCapable ( )

inlinevirtual

Implements CommNet.ICommNetControlSource.

void KerbalSeat.LeaveSeat ( KSPActionParam act )

inline

KSP Action that makes the occupant of the kerbal seat to eject from seat. When multiple will leave at once all the vessels will switch focus to active vessel for every kerbal seat ejection.

void KerbalSeat.MakeReferenceToggle ( KSPActionParam act )

inline

void KerbalSeat.MakeReferenceTransform ( )

inline

void KerbalSeat.OnChildRemove ( Part child )

inline

override void KerbalSeat.OnInventoryModeEnable ( )

inlinevirtual

This method will be called when this modules part and itself is first enabled (when it is attached to a vessel) when created in Inventory/Construction mode.

Reimplemented from PartModule.

override void KerbalSeat.OnLoad ( ConfigNode node )

inlinevirtual

Use OnLoad to load any additional data from the ConfigNode provided

Parameters

node

Reimplemented from PartModule.

override void KerbalSeat.OnSave ( ConfigNode node )

inlinevirtual

Use OnSave to serialize additional module information into the ConfigNode provided

Parameters

node

Reimplemented from PartModule.

override void KerbalSeat.OnStart ( PartModule.StartState state )

inline

override void KerbalSeat.OnStartFinished ( StartState state )

inlinevirtual

Called when the part finishes starting. The StartState gives an indication of where in flight you are. All values may not be plugged in!

Parameters

state

Reimplemented from PartModule.

bool KerbalSeat.SeatBoundsAreClear ( Part candidate )

inline

Runs a CheckCapsule to see if there is enough room around the seat to fit a Kerbal.

Returns

virtual void KerbalSeat.UpdateNetwork ( )

inlinevirtual

Implements CommNet.ICommNetControlSource.

Member Data Documentation

string KerbalSeat.controlTransformName = ""

Vector3 KerbalSeat.ejectDirection = Vector3.up

Vector3 KerbalSeat.ejectionForceDirection = Vector3.up

The direction the Ejection force will be applied, local space relative to the seat

float KerbalSeat.ejectionForceMax = 100f

The max Ejection Force for a kerbal

float KerbalSeat.ejectionForcePercentage = 0f

An abstract strength value for ejection force, if not 0 then the kerbal will be Ejected along the ejectionForceDirection

string KerbalSeat.seatName = ""

string KerbalSeat.seatPivotName

Property Documentation

Transform KerbalSeat.ControlTransform

get

float KerbalSeat.EjectionForce

get

The Ejection Force that is applied to the kerbal on Leave Seat/Eject Kerbal Action

Part KerbalSeat.Occupant

get

Transform KerbalSeat.SeatPivot

get

The documentation for this class was generated from the following file:

KSP/Assets/Scripts/Part Scripts/PartModules/EVA/KerbalSeat.cs

Public Member Functions

Public Attributes

Properties

Additional Inherited Members

Member Function Documentation

Member Data Documentation

Property Documentation