Inheritance diagram for ModuleRCSFX:

Public Member Functions

override void DeactivateFX ()

override void DeactivatePowerFX ()

override string GetModuleDisplayName ()

Override this to provide a Localized version of the PartModules Name for UI components More...

override void OnAwake ()

Method fires once the module has been added to the part. Use for first time setup. Module will not have loaded fully by this point More...

Public Member Functions inherited from ModuleRCS

float CalculateThrust (float totalForce, out bool success)

virtual bool CanBeDetached ()

Returns true if not active. More...

virtual bool CanBeOffset ()

Returns true if not active. More...

virtual bool CanBeRotated ()

Returns true if not active. More...

void FixedUpdate ()

List< PartResourceDefinition > GetConsumedResources ()

override string GetInfo ()

Returns formatted string of additional data for use in the VAB and SPH More...

float GetLeverDistance (Transform trf, Vector3 axis, Vector3 leverPivotPosition)

float GetLeverDistanceOriginal (Vector3 leverPivotPosition)

void GetPotentialTorque (out Vector3 pos, out Vector3 neg)

override string GetStagingDisableText ()

override string GetStagingEnableText ()

override bool IsStageable ()

Should this module be counted when seeing whether to have a stack icon present? Override in a module for custom behavior; otherwise returns true if the module (or something the module inherits from above PartModule itself) overrides OnActive() More...

override void OnActive ()

Called when the part is set active (after unpacking etc) More...

override void OnLoad (ConfigNode node)

Use OnLoad to load any additional data from the ConfigNode provided More...

override void OnModuleAdjusterRemoved (AdjusterPartModuleBase adjuster)

Perform processing specific to this part module when an adjuster is removed. More...

override void OnStart (PartModule.StartState state)

double RequestPropellant (double mass)

void SetResource (string resource)

void SetupPropellant (ConfigNode node)

void ToggleAction (KSPActionParam param)

void ToggleToggles ()

void Update ()

Public Member Functions inherited from PartModule

void AddPartModuleAdjuster (AdjusterPartModuleBase newAdjuster)

Call this to add an adjuster to this part module. More...

void AddPartModuleAdjusterList (List< AdjusterPartModuleBase > moduleAdjusters)

Applies the appropriate module adjusters. Performs checks to make sure that the adjusters are valid too. More...

bool AppliedUpgrades ()

Returns true if upgrades are applied More...

void ApplyAdjustersOnStart ()

Called when a part module is loaded and applies all of the currently loaded adjusters. More...

virtual void ApplyUpgradeNode (List< string > appliedUps, ConfigNode node, bool doLoad)

Applies the upgrades to a confignode. Will either copy the upgrades back to the node or (if doLoad) calls load/onload on it. More...

virtual bool ApplyUpgrades (StartState state)

Will find and apply upgrades. Called during Part's ModulesOnStart, before a module's OnStart. More...

void Awake ()

delegate bool boolPMApplyUpgrades (PartModule pm, StartState state)

delegate bool boolPMBoolDelegate (PartModule pm, bool apply)

void ClearPersistentId ()

Clear the modules persistentId More...

void Copy (PartModule fromModule)

virtual void DemoteToPhysicslessPart ()

This method will be called from Part class DemoteToPhysicslessPart when the part is being converted from physical to physicsless part. It is called before the joints and rigidbodies are destroyed. More...

virtual bool FindUpgrades (bool fillApplied, ConfigNode node=null)

Find applicable upgrades to the partmodule (isunlocked and isenabled) and add to the upgradesApplied list. Pass true if you want to add the upgrades to upgradesApplied, false if you just want to know if at least one upgrade is applicable (unlocked rather than enabled) More...

virtual Color GetCurrentColor ()

Returns the current part module color. More...

virtual Color GetCurrentColor (string fieldName)

Returns the current part module color for a field where usespe. More...

uint GetPersistenActiontId ()

Get the modules persistentID, and create one if it doesnt already have one More...

uint GetPersistentId ()

Get the modules persistentID, and create one if it doesnt already have one More...

virtual string GetUpgradeInfo ()

Called by Upgrade Stats dialog More...

bool HasUpgrades ()

Returns true if upgrades exist for the partmodule More...

bool IsValidContractObjective (string objectiveType)

Returns if, for example, an antenna part module qualifies as an antenna for contracts. More...

void Load (ConfigNode node)

virtual void LoadUpgrades (ConfigNode node)

Loads module-relevant upgrades from the partmodule confignode More...

uint NewPersistentId ()

Reset the modules persistentId to a new number More...

virtual void OnColorChanged (Color color)

Meant to be overwritten by part modules implementing color changes. In this case, it doesn't matter which color picker changed specifically. More...

virtual void OnColorChanged (Color color, string pickerID="")

Meant to be overwritten by part modules implementing color changes More...

virtual void OnConstructionModeFixedUpdate ()

This method will be called when in EVA Construction mode and this part and itself is disabled (when it is not attached to a vessel) every FixedUpdate(). More...

virtual void OnConstructionModeUpdate ()

This method will be called when in EVA Construction mode and this part and itself is disabled (when it is not attached to a vessel) every Update(). More...

virtual void OnCopy (PartModule fromModule)

Use OnCopy to copy any additional data from the PartModule provided More...

virtual void OnFixedUpdate ()

Called every physics/fixed frame that the part is active More...

virtual void OnIconCreate ()

Method fires just before components are stripped from the gameobject to make it an icon. (The part is instantiated and then various components like Part, PartModule, EffectBehaviour, Colliders, Particles, etc are stripped and then it's set as the icon prefab. This lets PartModules do stuff to the model right before that happens. More...

virtual void OnInactive ()

Called before the part goes inactive (after packing etc) More...

virtual void OnInitialize ()

Called on all modules after all parts are loaded but before they give the ship to the game More...

virtual void OnInventoryModeDisable ()

This method will be called when this modules part and itself is first disabled (when it is not attached to a vessel) when created in Inventory/Construction mode. More...

virtual void OnInventoryModeEnable ()

This method will be called when this modules part and itself is first enabled (when it is attached to a vessel) when created in Inventory/Construction mode. More...

void OnModuleAdjusterAddedWrapper (AdjusterPartModuleBase adjuster)

Wrapper to check the mission expansion availability before performing processing specific to this part module when an adjuster is added. More...

virtual void OnPartCreatedFomInventory (ModuleInventoryPart moduleInventoryPart)

This method is called when a part is being taken out from a slot while being in EVAConstruction mode. More...

virtual void OnSave (ConfigNode node)

Use OnSave to serialize additional module information into the ConfigNode provided More...

virtual void OnStart (StartState state)

Called when the part starts. The StartState gives an indication of where in flight you are. All values may not be plugged in! More...

virtual void OnStartBeforePartAttachJoint (StartState state)

Called in flight scene in Part.Start just before the Part attachnode joints are created. More...

virtual void OnStartFinished (StartState state)

Called when the part finishes starting. The StartState gives an indication of where in flight you are. All values may not be plugged in! More...

virtual void OnStoredInInventory (ModuleInventoryPart moduleInventoryPart)

Called when the part is stored in an inventory. More...

virtual void OnUpdate ()

Called every frame that the part is active More...

virtual void OnWasCopied (PartModule copyPartModule, bool asSymCounterpart)

Called when the PartModule was copied, through Alt+Copy or symmetry More...

virtual void OnWillBeCopied (bool asSymCounterpart)

Called when the PartModule is about to be copied, through Alt+Copy or symmetry More...

virtual bool OnWillBeMirrored (ref Quaternion rotation, AttachNode selPartNode, Part partParent)

This is called in the Editor scene when a symmetry copy of a part is being positioned. Only called on the symmetry parts and only when symmetry mode is set to Mirror. It allows the mirror rotation to be changed and returned before being applied to the symmetry copy part.

Parameters

rotation	The current calculated rotation. Will be updated if method returns true.
selPartNode	The attachnode.
partParent	The part that will become this part's parent.

Returns: True if the rotation was changed. Otherwise will return false.

More...

virtual List< Color > PresetColors ()

Preset colors received for any part module. By default, returns only black, override to make your own selection. More...

virtual string PrintUpgrades ()

virtual void PromoteToPhysicalPart ()

This method will be called from Part class PromoteToPhysicalPart when the part is being converted from physicsless to physical part. More...

void RemovePartModuleAdjuster (AdjusterPartModuleBase oldAdjuster)

Call this to remove an adjuster from this part module. More...

void RemovePartModuleAdjusterList (List< AdjusterPartModuleBase > moduleAdjusters)

Removes the appropriate module adjusters. Performs checks to make sure that the adjusters are valid too. More...

void Save (ConfigNode node)

virtual void SetStaging (bool newValue)

Run by the part's staging toggle handler, sets staging on modules on symmetry counterparts. More...

void SetStagingState (bool newState)

Set the staging enabled bool for this module. More...

virtual bool StagingEnabled ()

Gets current staging status (is staging enabled for this module) Override me! More...

virtual bool StagingToggleEnabledEditor ()

virtual bool StagingToggleEnabledFlight ()

void ToggleStaging ()

virtual void UpdateStagingToggle ()

Updates the staging toggle More...

delegate void voidPMApplyNodeDelegate (PartModule pm, List< string > appliedUps, ConfigNode node, bool doLoad)

delegate void voidPMDelegate (PartModule pm)

delegate void voidPMNodeDelegate (PartModule pm, ConfigNode node)

Public Attributes
string	runningEffectName = "running"

Public Attributes inherited from ModuleRCS
FloatCurve	atmosphereCurve
	a curve to determine loss or gain of thrust due to changes in atmosphere vs vacuum values are based on ISP to ATM Pressure More...

bool	currentShowToggles = false

bool	enablePitch = true

bool	enableRoll = true

bool	enableX = true

bool	enableY = true

bool	enableYaw = true

bool	enableZ = true

float	EPSILON = 0.05f
	Minimum latch for thrust. Is predominantly uses as Epsilon ^ 2 in comparisons More...

bool	flameout = false

double	flowMult = 1d

bool	fullThrust = false
	always use full thrust More...

float	fullThrustMin = 0.2f
	if thrust amount from dots < this, don't do full thrust More...

Vector3	fxOffset = Vector3.zero

Vector3	fxOffsetRot = Vector3.zero

string	fxPrefabName = "fx_gasJet_white"

string	fxPrefix = "rcsGroup"

double	G = 9.80665d

bool	isJustForShow = false

double	ispMult = 1d

double	maxFuelFlow = 0d

double	mixtureDensity
	What is the density of the mixture. More...

double	mixtureDensityRecip

float	precisionFactor = 0.1f

List< Propellant >	propellants

bool	rcs_active

bool	rcsEnabled = true

float	realISP = 0.0f

bool	requiresFuel = true

string	resourceFlowMode = "STAGE_PRIORITY_FLOW"

string	resourceName = "MonoPropellant"

bool	shieldedCanThrust = false

bool	showToggles = true

FloatCurve	thrustCurve = new FloatCurve()
	The curve to use More...

float	thrustCurveDisplay = 1f

float	thrustCurveRatio = 1f

List< FXGroup >	thrusterFX

float	thrusterPower = 1.0f

string	thrusterTransformName = "RCSthruster"

List< Transform >	thrusterTransforms

float[]	thrustForces

float	thrustPercentage = 100f

bool	useLever = true

bool	useThrottle = false

bool	useThrustCurve = false
	should we use a thrust curve (based on resource remaining) ? More...

bool	useZaxis = false

Public Attributes inherited from PartModule
bool	isEnabled = true

bool	moduleIsEnabled = true

string	moduleName

bool	overrideStagingIconIfBlank = true

ModuleResourceHandler	resHandler = new ModuleResourceHandler()

bool	showUpgradesInModuleInfo = false

ProtoPartModuleSnapshot	snapshot

string	stagingDisableText = ""

bool	stagingEnabled = true

string	stagingEnableText = ""

bool	stagingToggleEnabledEditor = false

bool	stagingToggleEnabledFlight = false

List< ConfigNode >	upgrades

List< string >	upgradesApplied = new List<string>()

bool	upgradesApply = true

bool	upgradesAsk = true

Protected Member Functions
override void	SetupFX ()

override void	UpdatePowerFX (bool running, int idx, float power)

Protected Member Functions inherited from ModuleRCS
Vector3	ApplyInputLinearAdjustments (Vector3 inputLinear)

Vector3	ApplyInputRotationAdjustments (Vector3 inputRotation)

bool	IsAdjusterBreakingRCS ()

override void	OnModuleAdjusterAdded (AdjusterPartModuleBase adjuster)
	Perform processing specific to this part module when an adjuster is added. More...

Protected Member Functions inherited from PartModule
ConfigNode	GetUpgrade (string name)

virtual void	LoadUpgradesApplied (List< string > applieds, ConfigNode node)
	Load the applied upgrade names More...

virtual void	SaveUpgradesApplied (ConfigNode node)
	Save the applied upgrades. More...

IEnumerator	UpgradeWaitForScenarioModules ()

Additional Inherited Members
Public Types inherited from PartModule
enum	PartUpgradeState { PartUpgradeState.NONE, PartUpgradeState.LOCKED, PartUpgradeState.AVAILABLE }

enum	StartState { StartState.None = 0, StartState.Editor = 1, StartState.PreLaunch = 2, StartState.Landed = 4, StartState.Docked = 8, StartState.Flying = 16, StartState.Splashed = 32, StartState.SubOrbital = 64, StartState.Orbital = 128 }

Static Public Member Functions inherited from PartModule
static ReflectedAttributes	GetReflectedAttributes (Type partModuleType)

static PartUpgradeState	UpgradesAvailable (Part part)
	Returns true if at least one module on the part has at least one upgrade available (isUnlocked) More...

static PartUpgradeState	UpgradesAvailable (Part part, ConfigNode node)
	Returns true if at least one module on the part has at least one upgrade available (isUnlocked) More...

Static Public Attributes inherited from PartModule
static voidPMApplyNodeDelegate	ApplyUpgradeNodeDel

static boolPMApplyUpgrades	ApplyUpgradesDel

static bool	ApplyUpgradesEditorAuto = true

static boolPMBoolDelegate	FindUpgradesDel

static voidPMNodeDelegate	LoadExpansionNodes
	Hook for loading extra nodes common to all part modules. More...

static voidPMNodeDelegate	LoadUpgradesDel

static voidPMNodeDelegate	SaveExpansionNodes
	Hook for saving extra nodes common to all part modules. More...

static voidPMDelegate	SetupExpansion
	Hook for performing extra setup common to all part modules. More...

static string	UpgradesAvailableString = "#autoLOC_6002273"

static string	UpgradesLockedString = "#autoLOC_6002274"

Protected Attributes inherited from ModuleRCS
Dictionary< Propellant, KSP.UI.Screens.ProtoStageIconInfo >	PropellantGauges

int	tC

Static Protected Attributes inherited from PartModule
static Dictionary< string, ConfigNode >	exclusives = new Dictionary<string, ConfigNode>()

static Dictionary< Type, ReflectedAttributes >	reflectedAttributeCache = new Dictionary<Type, ReflectedAttributes>()

Properties inherited from PartModule
BaseActionList	Actions `[get]`

int	ClassID `[get]`

string	ClassName `[get]`

List< AdjusterPartModuleBase >	CurrentModuleAdjusterList `[get]`
	List of all the module adjusters that are currently active on this part module. More...

BaseEventList	Events `[get]`

BaseFieldList	Fields `[get]`

string	GUIName `[get]`

bool	HasAdjusters `[get]`
	Has this part module been adjusted? More...

ReflectedAttributes	ModuleAttributes `[get, set]`

Part	part `[get, set]`

uint	PersistentActionsId `[get, set]`
	A unique identifier for each vessel including from when it was Shipconstruct More...

uint	PersistentId `[get]`
	A unique identifier for each vessel including from when it was Shipconstruct More...

Vessel	vessel `[get]`

Member Function Documentation

override void ModuleRCSFX.DeactivateFX ( )

inlinevirtual

Reimplemented from ModuleRCS.

override void ModuleRCSFX.DeactivatePowerFX ( )

inlinevirtual

Reimplemented from ModuleRCS.

override string ModuleRCSFX.GetModuleDisplayName ( )

inlinevirtual

Override this to provide a Localized version of the PartModules Name for UI components

Returns

Reimplemented from ModuleRCS.

override void ModuleRCSFX.OnAwake ( )

inlinevirtual

Method fires once the module has been added to the part. Use for first time setup. Module will not have loaded fully by this point

Reimplemented from ModuleRCS.

override void ModuleRCSFX.SetupFX ( )

inlineprotectedvirtual

Reimplemented from ModuleRCS.

override void ModuleRCSFX.UpdatePowerFX	(	bool	running,
		int	idx,
		float	power
	)

inlineprotectedvirtual

Reimplemented from ModuleRCS.

Member Data Documentation

string ModuleRCSFX.runningEffectName = "running"

The documentation for this class was generated from the following file:

KSP/Assets/Scripts/Part Scripts/PartModules/Control/ModuleRCSFX.cs

Public Member Functions

Public Attributes

Protected Member Functions

Additional Inherited Members

Member Function Documentation

Member Data Documentation